620nm - 620nm - 630nm - 660nm Red Color 1W high power Led diode 60-70LM Luminous

620nm - 620nm - 630nm - 660nm Red Color 1W high power Led diode for Led plant growing lamp

Typical applications:

1)     Portable flashlight

2)     Automotive lights

3)     Reading lights

4)     LCD TV/monitor backlights

5)     Indoor and outdoor commercial lighting

6)     Decorative/entertainment lighting

7)     General lighting

Packing:ESD polybag

Other Applications

Indoor and outdoor illumination (Spot ligt, led bulb ·,Streetlight)

Interior automotive lighting(e.g. dashboard backlighting)

Reading light(aircraft,car,bus)

Signl and symbol luminaries

Marker lights(e.g. stepts,exit ways,etc.)

Architectural illumination

Specifications:

How to use this LED?

Thermal Mangement

  i.  For maintaining the high flux output and achieving reliability,  LEDs should be mounted on a metal core printed circuit board (MCPCB) or other kinds of heat sink with proper thermal connection to dissipate approximately 1W of thermal energy at 350mA operation.

  ii.   Heat dissipation or thermal conduction design is strongly recommended on PCB or MCPCB for reflow soldering purposes.

  iii. Sufficient thermal management must be implemented.Otherwise,the junction temperature of die may exceed over the limit at high current driving conditions and the LEDs’ lifetime may be decrease dramatically.

  iv. For further thermal management suggestions,please consult the chip Design Guide or local representatives for assistance.

  v. Sufficient thermal management must be conducted,or the die junction temperature will be over the limit under large electronic driving and LED lifetime will decrease critically.